Electrical Powerboards Safety Guidelines

The state fire brigades and emergency services are frequently reminding consumers to use powerboards safely. In fact, many house fires are caused by the misuse of powerboards by people overloading them and exceeding the manufacturers recommended rating.

The wide utilisation of powerboards in homes confirms people's reliance on these devices. You will find most people unaware of the risks of power boards if used incorrectly. Electricity has the potential to kill people if proper care isn't adhered to, hence the reason why some simple steps should be followed when connecting electrical appliances to powerboards.

Manufacturers of power boards will design their products to meet the electrical power rating of a country's existing voltage and current rating. Often people will overload the powerboards with too many devices, for example, when connecting the electric heater, computer and its interconnected peripheral devices will at times exceed the recommended safety rating of a power board. Since heaters can draw big currents such as 3.6Amps at times. Therefore it doesn't take much for the powerboard rating to be reached.

Modern computers are packed with so many resources each drawing their own current, greedily consuming the available power. For example, the PCs internal power supply wattage has steadily increased over the years to cope.

While most people wouldn't realise the unseen risks they create when overloading power boards and not having adequate overload protection. Ensure your powerboard has good ventilation nearby and not covered-up causing unnecessary heat build-up.

People will try to charge their Bluetooth devices via the computer's USB socket, however at times the PC hasn't enough power to do so, i.e. iPad will often not recharge via a PC USB because of limited power available for recharging purposes. Therefore charge the device via the adapter supplied by Apple to a suitable power outlet.

Safety guidelines:

Don't

Do not overload the powerboard with too many big current consuming electrical appliances, for example, heaters draw big current

Do not exceed the manufacturer's voltage and current rating, for example 10Amps and 240V

Do not use double adaptors on the powerboard

Do not position the powerboard in hot areas, for example, avoid placing near heater and sunny hot glass window

Do not join or interconnect powerboards together, for example, no daisy-chains

Do not use a thinner extension cable before powerboard

Do not locate near water or moisture

Keep adequate ventilation near powerboards to reduce heat build-up

Keep young children away and out of reach

Check rating of the electrical appliances before connection to powerboards

Ensure the combined total Amps (current) consumption of appliances doesn't exceed the Amps (current) of the powerboard

Buy a powerboard with overload protection and surge protection

Buy powerboards with individually switched outlets and wide spacing for power packs

Visually and physically inspect powerboards for damage regularly

Turn off appliances at powerboard and power point switch when not in use

Only use powerboards designed to meet Australian Electricity Standards

Conclusion

An important thing to know is surge protected powerboards have a short life. The surge protected powerboards actual intended purpose causes them to deteriorate overtime. Thus performing regular inspections and operating the powerboard reset button will help determine if the powerboard is due for replacement.

These easy to follow safety guidelines should be considered when dealing with electrical powerboards. If at any time you think there could be an electrical hazard keep clear and immediately contact an electrician for assistance. Remember your meter box generally is located outside of the premises, and will have a circuit breaker you can turn-off the electricity till a licensed electrician inspects the wiring.

Business owners have a responsibility to ensure their electrical equipment is regularly inspected and tested by competent people. Such as an electrician that performs inspection, testing and tagging methods.

If electrical equipment is utilised in changing conditions, for example exposure to moisture, heat, vibration, mechanical damage, corrosive chemicals or dust, a safety inspection and testing of electrical equipment is required in places of work. For more information contact the nearest Government Authority for workplace safety.

We have a full range of electrical powerboards for consumers at home and at work. Our high-end powerboards are reasonably priced for every shopper looking for protection for their important electrical equipment. Additionally, remind your family and friends to ensure they connect their computer peripherals safely.

To purchase high-quality powerboards visit our online shopping store http://www.cits.net.au/c/61/power-boards-and-server-rack-power-board-supply

For more information on electrical powerboards contact our customer support http://www.cits.net.au/contactus

Article Source: http://EzineArticles.com/8086741

Safety And Septic Trucks - It's All About Inspections!

Safety And Septic Trucks

The necessity to stay safe while driving and operating septic trucks should never be taken for granted. Risks to working with septic trucks must be clearly understood as is knowing how to prevent any possible problems by using the right safety measures. One of the more crucial ways to reduce overall risk is to do daily inspections of every truck and its equipment before it is used. Although it may seem repetitive and time-consuming, any effort that helps prevent an accident or malfunction definitely makes it worth time to do a proper inspection.

Daily Safety Inspections

Knowing the right way to use and maintain a septic truck to keep it running and performing properly over time is vital. Regular daily inspections are still important; it is a very good idea to be sure the truck is in the same condition in the morning as it was when it was parked at the end of the previous day. Consider the following parts of the vehicle when doing safety inspections.

Safety Gear - Before leaving to travel to the first job of the day, inspections should begin by making sure that all necessary protective gear and equipment is available in or on the truck and in good working order. Fire extinguishers should be examined to be sure that they are still fully charged; there should be an ample supply of road flares and necessary emergency signs; and all required safety items must be on the truck. Check personal gear and make certain that everything is in good working order and if anything is missing or inadequate, be sure they are replaced before starting the day's work.
Pump - Once it has been determined that all necessary equipment and gear is present, the pumps should be inspected. This includes opening traps and shut-off valves to be sure that they are clean and dry, not blocked or frozen inside which could otherwise make that first job of the day a disaster. Look for general signs of wear on and in the pump; check the hoses and be sure that they appear to be in good shape; and examine the truck's tank to look for any obvious damage to the outside. Examine all couplings and seals on pumps and hoses, making sure that they are in good condition without any evidence of excessive wear or leaking issues.
Truck - Finally, after closely examining the pump and its parts and accessories, it is time to inspect the truck itself. Check for obvious problems such as leaks under the hood as well as underneath the body to look for any evident exhaust or axle issues. Be sure the tires are properly inflated. Start the vehicle and test all lights and signals; listen to the engine for any uncommon sound that might indicate a problem.

A very important thing that every vehicle should always carry are all necessary log books, instruction manuals, and daily inspection reports. Although log books are a part of the job that might seem tedious or something that could wait until later to be completed, filling out logs and forms every day is essential. Accurate records provide a good way to keep track of what work was done on a vehicle and more importantly, it is evidence that the truck was properly inspected and/or cleaned when it was put away after the prior day's work. Rather than having to guess if the tank was washed out, good records will show that it was done and that alone could prevent an accident from happening because different reactive substances were accidentally mixed in the tank.

Once a routine has been established, it shouldn't take very long to go down a checklist before and after use, then clean and park the truck. The extra time involved is minimal compared to the trouble-free use that can come from catching problems while still small enough to be easily resolved. Septic trucks will last longer if the time is taken to perform proper maintenance to detect problems before they become work-stopping issues!

Christopher M. Hunter is an expert in commercial specialty trucks. To find out more about Septic Trucks For Sale, go to the main website at: http://www.septictrucks.com/.

Article Source: http://EzineArticles.com/8101471

Health and Safety Considerations When Working in IT

Health and Safety

You might look at the title of this article and think "Health & safety in IT? Why?" And to a certain extend you would be right. There is no heavy machinery, no real chance of falling off anything high and very little chance of actually getting injured. In fact I'm a First Aider in our office full of people and computers and the only things I've had to deal with are injuries that people have inflicted on themselves on the way into work. Nothing has actually happened "in" work... yet.

However, that doesn't mean that there isn't the potential for injury and harm. Here are a few areas that you need to be careful of, even working in IT.

Ergonomics

We'll start with a biggie! This is fast becoming one of the biggest causes of injury in the work place and can lead to problems with your back, joints, eyesight and in some more extreme cases RSI or Carpal Tunnel Syndrome. The biggest factor is your work station. According to Health and Safety regulations you should sit upright with your body at 90 degrees to your legs and your knees at a 90 degree angle to the floor and your feet resting firmly on the ground or footrest if you can't reach. You should sit no more than 16 inches from your keyboard with your eyes in line with the top of your monitor.

Your fingers should be in a relaxed position with your wrists in a relaxed, neutral position with the aid of a wrist support if necessary. And that is just how you sit! There are all sorts of regulations with regard to the chair you sit on, the lighting in the room you work in and even the glare that you get off your monitor. You can find check lists online to help you determine if your workstation is Ergonomic or not.

Lifting and Carrying

This can be quite a big part of IT especially if equipment needs to be moved. Okay so monitors are not quite as big and bulky as they used to be, but some IT equipment can still be heavy all the same. Again, there are a few simple rules that you can follow:

Avoid bending over to pick things up, always bend at the knees.
Do not twist at the waist, always turn around.
Avoid excessive reaching
Try to avoid carrying out lifting/carrying tasks above shoulder level
Limit the weight of a load that is lifted and where possible use mechanical aids
Try not to carrying heavy loads with one hand.

There are others, but these are the main ones.

Ladders

There will be times when you need to be working up ladders as the roof is where most of the cabling goes. You will need to make a decision about which ladders are right for the job and make sure whichever ladders you choose are set up correctly and in the correct position so that you do not have to stretch.
There are other areas to look at, but this is just a taster as to what you need to be looking at even in a nice, safe comfortable IT office.

Ellen Ralph is an experienced author in health and safety. If you are considering reviewing your health and safety procedures she recommends you investigate obtaining ISO accreditation.

Article Source: http://EzineArticles.com/8096404

Home Safety: How

Home Safety

For homeowners there are hundreds of considerations that are integral in the safety of their property, but most of all, the safety of their families. It is vitally important that they be aware of the many dangers inherent in their ownership. A few of these dangers should be held at the forefront of their minds, taking into account the universal nature they pose.

Fire is one of the most violent, damaging misfortunes that can befall a household, consuming irreplaceable memories and mementos, and even precious lives. For that reason precautions taken to prevent fires are of the utmost importance. Smoke and carbon monoxide detectors should be placed in all rooms, with the alarms tested monthly, and batteries replaced annually. This is of the utmost importance in allowing the earliest warnings to homeowners to protect that which is most importance. In the event of early detection, it is also important to place fire extinguishers strategically throughout the home to ensure a speedy response.

A contributor to fire as well as other dangers is electrical failures. Electrical malfunctions can be just as serious and often very preventable. The first step is to check for frayed wiring that could lead to electrocution or fire. The visibility of wires and cords is a good way to always maintain vigilance, so running cords under carpeting or furniture is to be avoided as much as possible, if not done away with entirely. Extension cords should be used wisely and not gratuitously. Extension cords can lead to overloading or shorts that could create accidents. If electrical access becomes absolutely necessary in a part of a room without an outlet, it would be wise to have one installed rather than tempt fate. Electrical splitters are also something to be used with discretion. Overloading an outlet can be another way of causing a fire.

Homes with children have their own concerns, sometimes akin to those above. First of all, electrical outlets that are at floor level should be covered with plastic covers if they are not currently in use. All cabinets should be locked, and hazardous materials stowed safely away. Vitamins and medications should be in child proof bottles and poisonous chemicals kept completely out of reach. In the event that something should happen, children should be taught how to dial 911 as well as other important numbers, such as local police, fire departments, and poison control. Children are reputed for having the talent of finding trouble, so preparation can only get you so far. However, luck favors the prepared.

With these in mind a great amount of threats will be removed from the minds of most homeowners, ensuring peace of mind and the safety of house and home, person and possession.

Article Source: http://EzineArticles.com/?expert=Kallen_Diggs

Taking Safety Precautions When Swinging

Safety Swinging

While outsiders tend to think of swinging in terms of "keys in the bowl" parties and actions, the overwhelming majority of swingers take more precautions than you think. Swingers are often criticized for their lack of concern for their safety and sexual health. But in an age where diseases can spread quickly, Swingers are taking the necessary precautions to ensure their safety and health is intact.

Think about this question for a minute: What is the difference between being a swinger and swapping partners with another couple and being single taking someone home from the bar for a one night stand?

In most cases, swingers are actually taking more precaution:

• Swingers often are members of private clubs where members have to apply to join.
• Swingers often meet the other couple before engaging in sexual activity.
• Swingers abide by pre determined rules before swapping partners.
• And, in many cases, swingers stick with the same few couples.

While there are still some obvious risks to swinging, swingers can reduce their chances of getting sexually transmitted diseases by taking the following precautions:

• Refrain from engaging in sex when under the influence
• Always use a condom
• Have good hygiene habits
• Get tested regularly and make sure your sex partners get tested as well
• Limit the number of partners you have
• Select other couples wisely
• Know the signs of STD's and get treated immediately if you show signed.

Taking these precautions will greatly reduce your sexual health risks.

A second precaution that does not get enough attention is personal safety when engaging in swinging. Always be cautious when meeting new people or couples, especially if you meet them online.

Take your time and get to know them before you actually engage in swinging activities. It is a good idea to meet them in a public place. Meet at a coffee shop and talk about what you and your partner want to get out of the experience. Develop a personal relationship with couples. It is much safer to have a select few couples who you can trust than frequently swapping with many different couples.

Never, under any circumstance should you meet with another couple in an obscure area. Do not give out your personal information or agree to meet others at their home if it your first time meeting. You never know what can happen and you must take as many precautions as possible.

This is why swingers clubs are so valuable. Members are screened and you can experiment in a safe environment. Your risks are greatly reduced in swingers clubs.

While the swingers lifestyle does come with its health and safety risks, being responsible and taking the necessary precautions will ensure you can minimize the risk and embrace the lifestyle at your own pace.

The O Zone is a Toronto swingers club offering a plethora of wild and sexy amenities. We guarantee a memorable night for open-minded couples seeking an alternative lifestyle.

For more great information and tips on the Swingers Lifestyle, please visit www.ocouplesclub.com

Article Source: http://EzineArticles.com/?expert=Matt_Tabota

Features Of No-Exam Term Life Insurance

Life Insurance

Many people avoid buying insurance because of medical exams. This is often attributed to the fact that they are too busy to schedule an appointment, they have been diagnosed with medical problems or they hate needles. Whatever the reasons are for avoiding a medical exam you have an opportunity to give your family some deserved peace of mind. As you shop for insurance, you will discover many insurance service providers that offer an easy and quick no-exam insurance policy.

The no-exam insurance policy offers the fastest way of getting insurance coverage. This gives you a time efficient way of getting attractive insurance benefits. Like all other insurance policies, the no-exam insurance offers financial security to loved ones in the event of the breadwinner's death. The features of this policy include:

· No doctors visit
The no-exam policy does not demand a doctor's visit. Therefore, individuals who are reluctant about making doctors visits to have blood tests and other medical examinations can apply for this type of policy.

· Short application process
This policy attracts a short application process. As a result, many people opt for the no-exam policy because of the convenience and ease. By eliminating or shortening the process of underwriting, the application process can be approved and the policy issued on the same day. Nevertheless, the application form may seek to find out from the applicant whether they have any pre-existing medical conditions. Therefore, it is important to answer truthfully to ensure successful insurance claims at a future date.

· Affordable
This type of insurance policy is more costly than the fully underwritten insurance policies that require a physical examination. However, if avoiding a medical exam is necessary, this policy offers the best option.

· Secures the family
In order to secure loved ones from the financial burden arising from a tragedy or an unforeseen event, you need a policy that will provide the necessary financial relief. A no-exam policy will be in a position to offer this benefit which is also provided by a medically underwritten coverage, but without the hassle of a long application process.

· Guaranteed coverage
The policy offers a guaranteed coverage. It allows applicants with pre-existing health problems to obtain insurance coverage. With the traditional insurance policy, the insurance carrier often evaluates the applicants insurability based on several risk factors, such as age, health complications, family medical history, hobbies, occupation, tobacco use and much more. Insurance applicants who fail to qualify for insurance based on these factors will not be in a position to buy an insurance plan.

We provide the best info about whole life life insurance rates. For further details on this topic, visit our website!

Article Source: http://EzineArticles.com/8054384

Cold Weather Safety Clothing Can Keep You Warm This Winter

Cold Weather Safety

Whether you like it or not, the cold weather of winter has arrived. But cold weather doesn't mean you can take a breather from getting your work done. You need both the protection and safety provided by safety clothing, but you also need to keep warm. Fortunately, you can do both with uniquely targeted winter safety clothing that is designed specifically for cold climates. Let's go over some of the different types of protective clothing that has been designed to keep you both safe and warm during the cold winter months.

Do you need to wear a safety vest for your job but are always finding yourself cold? We all know that in general safety vests are not designed to keep in the warmth. So why not try something that does? Safety jackets get the job of a safety vest done all while keeping you warm at the same time. They often provide the equal or greater visibility, and meet ANSI standards for class II and III safety vests. Safety jackets come in a variety of styles, such as windbreakers, bomber jackets, and rain coats.
Need to wear a hard hat at work? Your head is where most of your body heat is lost and hard hats aren't exactly designed to keep heat in. If you work in a colder area, consider using hard hat liners to keep your head warm. Many liners keep the heat in, even after getting wet from rain or sweat.
Are you finding yourself constantly trying to keep your hands warm? Most pairs of work gloves aren't designed to keep your hands warm. That's why cold weather work gloves were created. These gloves were created specifically to both keep your hands protected and warm during the winter months. Many pairs of these cold weather gloves are also waterproof, to keep your hands warm in the rain as well.

At Ralzaider, we do our best to keep our customers informed on the latest product trends and information that can be used to keep them safe. It's getting cold our there and we want to make sure our customers have the right clothing for those chilly days. If you are finding yourself wishing you were warmer, consider trying a bomber jacket as a safety vest alternative, a hard hat liner to keep your head warm, and cold weather glovesfor those cold fingers. Don't let the cold weather get in your way.

Article Source: http://EzineArticles.com/5551699

Important Grapple Truck Safety In The Forest

Grapple trucks are a very useful piece of equipment in the forest and are used extensively for lifting and transporting heavy timber; however, the function of these vehicles does not end here, as they are easily adapted to many different tasks, making them one of the most in demand forestry service vehicles. There are inherent risks and dangers during operation which can be minimized or even prevented by using proper safety precautions. Following are a few reminders for using these vehicles in the woods.

Precautionary Measures

Improper use of a grapple loader on a job site can cause serious injuries or even fatalities. Listed below are some precautionary measures that should be fully understood before operating this equipment.

Manufacturer's Manual - Read and understand this manual, paying close attention to safety alert symbols.

Inspection - Fully inspect the hydraulic system of the grapple and check the boom for any leaks, potential damage from previous use, or missing/non-functioning components to avoid boom failure.

Repairs - Perform necessary repairs prior to operation.

Clear Area - Ensure everyone in the vicinity is away from the machine during operation.

Proper Speed - When hauling a load, gradually increase and maintain the speed of the vehicle so the load does not swing to prevent a tip over mishap. Keep the load as low as possible for proper visibility and rotational clearance.

Ground Conditions - Be conscious when performing tasks on hills, rocky ground, or loose fill surfaces as these machines are more prone to tip over accidents in such areas.

Avoid Sudden Stops - Refrain from sudden stops or jarring of the boom when hauling material to avoid loss of control.

Safety Measures

Following are the three 'P's' that need to be considered for the safe operation of these vehicles.

Preliminary Inspection - Prior to starting the engine, conduct an inspection of the vehicle and work site. This must be done to prevent accidents when lifting logs. Be sure the engine and controls are fully functional and there are no signs of failure. Any work site should be assessed for the presence of any hazards, such as branches that block visibility and workers in the area. Ensure the grapple grips the timber completely to avoid slipping. Check the hydraulic outriggers to ensure of fully engagement for stability when the logs are lifted onto the truck bed.

Personnel Training - Different types of heavy-duty equipment should not be used by untrained personnel to ensure that jobs are done accurately, efficiently, and safely. Accidents can happen if these vehicles are used by people lacking the proper knowledge on how to handle them. Every driver must have the right training and know how to correctly use them correctly for personal safety.

Personal Protective Equipment - The risk of exposure to forest hazards on the job site must also be addressed. The primary line of defense against such risks is using personal protective equipment. The benefits include minimizing risks and boosting personal protection. The use of PPE in the forest is only effective when trained workers know how to accurately choose, maintain, and use it.

Grapple trucks are a specialized type of knuckleboom that is very efficient - not only in lifting logs, but in performing various other applications. With more functions because of their versatility and efficiency, it is only natural that certain risks and dangers associated with usage will also increase.

There are certain safety rules and practices that must be followed; if not strictly applied on the work site, fatal accidents and serious injuries can result. Employers must offer training about the proper use of these machines and operators should be properly acquainted with safety procedures while using the equipment that includes: reading the manual; conducting preliminary inspections; assessing the work environment; and wearing PPE. By instituting such practices in the forest, a forestry company can certainly achieve an end goal of safety and financial stability!

Christopher M. Hunter is an expert in commercial specialty trucks. To find out more about Grapple Trucks, go to the main website at: http://www.firstfleettrucksales.com/home.

Article Source: http://EzineArticles.com/7314925

Children's Basic Guide to Bicycle Safety

Bicycle riding is a fun and healthy activity, especially for children. It is also a great way to help them develop their independence. However, children must understand that their bike is used for transportation and not for playtime.

Most children love to ride their bike a lot, especially during summer months. As a parent, you need to teach your child the basic bicycle safety rules to keep them safe while on the road. Doing so will also help them avoid injuries. Here are a few safety tips so that your child can continue to have fun riding his bike and still be safe.

Wear A Helmet
The best protection for your child when he is riding is a helmet. This is a very effective safety device that lowers the risk of head injury and sudden death from bicycle crashes. But riding a helmet is not enough. Your child should also wear a helmet that fits.

The helmet should meet the standards set by the U.S. Consumer Product Safety Commission
Let your child pick his own helmet so that he will more likely wear it every time he rides.
Make sure that your child knows how to properly put it on. As a tip, the helmet should comfortably sit on top of the head in a level position. It should not move around. Make sure that the straps are buckled, but it should not be buckled too tightly.
When putting on the helmet, your child should look up. He must be able to see the bottom rim of the helmet. In addition, the rid must be at two finger-widths above his eyebrows at most.
Let your child open his mouth wide after putting on the helmet. Ask him if the helmet hugs his head. If not, you should tighten the straps. The buckle should be flat against his skin.

Be Noticeable
Whether your child is riding during daytime, at dawn, or at night, he should be noticeable to other drivers and pedestrians. As a tip, make him wear neon or other bright colors when riding. He should also wear something that reflects light, such as a marking or a reflective tape. You can also consider installing flashing lights on his bike. You should remind your little one that just because he saw the driver of another vehicle doesn't always meant that the other driver saw him too.

Be Wary Of Road Hazards
Teach your young one to watch out for any hazards, such as broken glass, leaves, dogs, puddles, and potholes while riding. These hazards can lead to a serious bicycle crash. Aside from the road hazards, he should also follow traffic signs and watch the road and incoming traffic if he needs to cross the street.

This post is written by a blogger who wants to raise awareness regarding bicycle safety. She is aware of the horrible accidents that children can get into while they are riding their bicycle. She suggests to the family of the victims to seek a local bicycle accident lawyer or a Spokane injury lawyer to help them with their injury claims.

Article Source: http://EzineArticles.com/8071972

Health and Safety in the Office

For the majority of people working in industry, particularly heavy industry, an office sounds like a low risk, safe place to work with little risk to health. But for those working in an office environment, the risk of harm is all too often there and neither recognised, nor addressed.

So what are the risks that office workers are exposed to? This depends on the size of the office and the type of work undertaken. As with factories and other manufacturing units, the work undertaken and the environment the employees operate in, can vary greatly.

Office workers can find themselves exposed to a number of health risks which are not always assessed and as eluded to in the first paragraph, recognised or addressed. Risk to health could be from poor posture, inadequate space in which to work and poorly designed work stations.

Further health risks can arise from the work load, pressure imposed by performance related issues such as key strokes per minute, the number of mistakes per hour or the need to answer a certain number of calls or close out calls within a certain time.

These could be regarded as factors that increase stress and pose risks to the mental health of office employees.

The physical harm to health can manifest itself in conditions such as carpal tunnel syndrome and muscular skeletal injury, often caused by poor posture and bad workstation design.

Many office workers, particularly in smaller offices, have nowhere to take a break away from the workstation. On many occasions employees have been observed eating lunch at their workstation, effectively they are not getting a break.

For those working in call centres long hours and unsociable hours combined with difficult, even rude and aggressive customers can lead to stress and numerous related health issues.

So far only health has been looked at, safety has not been considered. It would be reasonable to suggest that the risks arising from working in an office are far lower than those faced by employees in industry. None the less the risks to safety arising from work activities are significant to those exposed to the risk.

Again risks are wide and varied, in a front office such as a hospital reception there could be a significant risk of encountering violence or abuse from members of the public. Slips and trips can happen in any environment; in offices with trailing cables, steps or damaged flooring, the risks are clearly increased.

Exposure to live electricity can also be an issue, in one bizarre but true incident a female employee crawled under her desk to unplug an electrical appliance. She did not switch off the supply and pulled out the three pin plug. This particular plug did not have sheathing on the pins. As the lady in question removed the plug her fingers came into contact with the pins resulting in an electric shock.

The shock caused her to jump back, and in doing so she struck her head on the underside of her desk. The routine task of unplugging an appliance resulted in her being injured to the extent that she had time off work and the incident being reported to the authorities.

There is also the risk of fire, exposure to legionella and risks arising from manual handing, this is not a comprehensive list but goes some way to show that offices are not always the risk-free places that some consider them to be.

Can these risks be reduced? Yes, they can. Go back to basics, assess the risks that employees are exposed to, carry out fire risk assessments, display screen equipment assessments and manual handling assessments and act upon the findings. Provide suitable welfare facilities and adequate training particularly around manual handling. Managers should also carry out assessments to ensure that employees are not exposed to harmful levels of stress.

Offices are reasonably safe and healthy places to work but this situation should be because health and safety has been managed, not just happened.

Article Source: http://EzineArticles.com/7685273

Do You Have a CCNSG Safety Passport?

Are you aspiring to work in any manufacturing, construction or processing industry? Do you have a CCNSG safety passport? If your answer is yes to the first question and no to the latter, quite simply you need one.
You may be wondering what a CCNSG safety passport actually is? Well first of all it stands for Client Contractor National Safety Group, and will come to you in the size of a credit card. This will be plastic photographed passport which will act as proof that you have completed and passed the required training. This will last you a total of three years, which means that after this time period you will need a renewal of your passport.

What will you gain from the CCNSG Safety Passport Training Programme? The scheme will ensure that all personnel and individuals who work in manufacturing or processing industries, have at least a basic knowledge of health and safety, prior to commencing work on a given site. This has been adopted with the goal of achieving approved safety performance, so that individuals whom work on-site will work in a careful and safe manner which will lower the risk to themselves and others.
After you have successfully completed the CCNSG Safety Passport training course, you will have required to knowledge in order to:

• Explain Health and Safety law and permits to work
• Outline safe working practices relating to scaffolding
• Outline safe working practices for access and exiting
• Describe accident and first aid procedures
• Explain fire precautions and procedures
• Define COSHH and personal protective equipment
• Explain the theories of Manual Handling
• Outline noise procedures and practices
• Define the regulations for work with cranes and heavy equipment
• Outline the excavations procedures and practices

Do you need to do the training? All personnel on a construction site should undertake the training and have one of these CCNSG passports, otherwise you may be refused entry on a site due to the site safety policies that should be in place. It is imperative that all personnel on site have this basic training as you will be working in a high risk industry. This means that individuals who work in manufacturing or construction are more likely to suffer from fatal or major injuries; thus to reduce this everyone should have a personal responsibility to ensure the health and safety for themselves and others.

If you think that you may require a CCNSG safety passport, you should act now and book a CCNSG training course.

Training Courses Direct Ltd is an established National Network of Accredited training courses right across the United Kingdom. With over 300 accredited training partners (and growing) and over 1,000 training venue's we are the LARGEST Health and Safety, First Aid and Construction Site Safety Training Company in the UK today. We offer IOSH working safely and CCNSG courses.

Article Source: http://EzineArticles.com/8082514

Burn All Fears With Fire Safety Regulations

Several decades ago, fire was so rare because it was so difficult to create but thanks to technology, fire can be easily made with a simple twist of a stove knob or with a scratch of a little match. With that, many say that this burning blaze has truly helped man's life become more comfortable and easier. It plays several roles in man's life like cook food, heat up a cold room and many more.

But despite all the benefits that fire presents, fire can burn all your dreams away when it gets out of control and smolder everything that you have worked for down to ashes. That is why it is important to make sure that your house is always safe and protected from these kinds of fire. And what better way to make sure that your house will not burn down into ashes than to follow the fire safety regulations.

Fire safety regulations were made by the government to try to lessen or to prevent the occurrence of fire in homes and buildings. But these regulations are more than safety signs, it tackles everything that about your home. From the materials that you used for building your home down to the fire safety tools that should be present in key areas of the house, the fire safety regulations got it all covered.

With that in mind, there are many benefits of being a good citizen who follows the fire safety regulations. One of which is that you will have more peace of mind when it comes to the protection of your family and your home. By having fire safety equipments to safeguard your home, you are guaranteed to sleep better at night because you do not have to worry about fire suddenly starting in your home.

Another is that the fire regulations teaches people to be more responsible because the government is requiring people to attend a fire safety training to teach them about fire responsibility, safety signs, getting out alive and proper handling of equipments. This information is great in developing a sense of responsibility in each and every person.

Also, these regulations can take you one step closer to being a good citizen. Fire prevention is everybody's responsibility and by doing your part in trying to prevent blazing infernos from happening by adhering to fire regulations, you have made the first move to becoming a helpful and ideal citizen of your country.

Fire has truly been helpful to mankind in many different ways. From providing warmth to people to being able to cook delicious and scrumptious food, fire has definitely made the people's life easier. But when fire is not handled properly, it can end up in disaster and burn everything to ashes. That is why it is important to know more about fire prevention and safety signs and to follow the fire safety regulation so that all your fears about being a victim of fire will melt away. So do your part and follow fire safety regulations and have a calm and fearless mind.

Dale Bratt gives practical tips on choosing the right fire safety regulations and safety signs [http://www.amazines.com/article_detail.cfm/1723471?articleid=1723471].

Article Source: http://EzineArticles.com/4644867

Firewood Storage Safety Tips For Your House

Almost every one understands the problems that could arise from storing flammable fuels and liquids around your home or in your garage. Most people don't realize the problems that firewood storage creates if stored incorrectly on your property.

I recommend that you store your firewood if possible, at least 25 feet away from your home or any structure that you don't want anything to happen to. Make sure that you stack the firewood as tight as you possibly can, to eliminate possible problems with rodents, reptiles and other animals small enough to make a home inside of your stack of firewood.

If you store any firewood on the ground, and don't use it within a few years, you can plan on the bottom layer of firewood rotting or suffering from termite infestation. I don't recommend lying plastic down, because plastic will trap moisture and it would almost be the same as simply laying the firewood on top of your soil.

Remember that stacks of firewood can catch on fire and if you plan on stacking your firewood next to your house for easy access, you should do your best to keep these firewood stacks as small as possible and again, I don't recommend this. The same rules that apply to home fire safety can easily be applied to firewood storage. Never store flammable materials around your firewood and I don't recommend storing the firewood near vehicles either.

If you can keep one thing in mind, when thinking about where or how you're going to store your firewood, just remember that firewood can catch on fire and think accordingly.

Prepare For Any Home Disasters Using Our Emergency Help Contractors List.

House Fire Prevention Tips and Ideas

You Can't Ever Imagine The Problems People Have Around Their Homes. Read Some Great Articles and Watch Some Incredible Videos To Prepare Yourself For Home Emergencies

Thanks For Reading My Articles

Article Source: http://EzineArticles.com/3381437

Material Data Safety Sheets - Chemical Safety Is An Important Issue

Material Data Safety Sheets

The application of strict procedures for chemical safety is an important part of preventing dangerous accidents in the workplace or in the laboratory material data safety sheets. There are many things you can do to ensure that all chemicals are used safely and only for the intended use . Any substance that is potentially hazardous should always be handled with care and treated in accordance with the manufacturer's specific instructions .

One way to ensure that safety is maintained in the workplace for all employees wear protective equipment when indicated. For example material data safety sheets, safety glasses are always required if you are at risk of being splashed by a hazardous substance. Similarly, any person touching hazardous materials should wear gloves .

Re-read the material data safety sheets information on the label of any chemical used is always wise . Do not handle the chemicals that have been stored in unlabeled containers . Because some substances unstable when combined reactions or dangerous material data safety sheets, it is never advisable to mix the chemicals with which they are familiar .

If a person suffers an injury when handling a suspect has been exposed to a specific chemical hazardous or to be treated at a time. Never a good idea to make an assumption that has not been damaged material data safety sheets. If one is in doubt, he or she should seek medical attention or first aid to avoid dangerous consequences.

All hazardous substances are delivered with a data sheet material safety . This will list all hazardous ingredients that are in the background and how to manage properly so that injuries can be prevented material data safety sheets. Sometimes abbreviated MSDS , this plug also common symptoms from direct and appropriate action to take in case of this happening .

Spill Cleanup is also a key issue for people material data safety sheets who work with or near hazardous chemicals. Most of the places where such products are used are the standard cleaning kits available to employees or others , which can be used in case of a spill . Most of these kits include rubber gloves and other protective equipment , absorbent silica material data safety sheets, and platelets can be used to absorb large amounts of the substance that was spilled .

Winter Safety Tips - General Tips for Surviving Winter

Winter Safety Tips

The Regional Fire Service Fire Kent offers several tips with the change of time people are becoming furnaces, fireplaces and stoves use wood and suffer blackouts.

Heating up winter safety tips:

1. Have furnaces , wood stoves and chimneys inspected by a professional to ensure they are clean and in good condition .

2. Move all winter safety tips flammable materials at least three feet away from heaters or electrical socket . This includes clothing , bedding and curtains.

3. Put ashes in a fireplace or stove in a metal container with a tight lid. Outside, winter safety tips away from flammable materials .

4. Always have smoke detectors. Having one in every room, in the hallway outside the room near the kitchen winter safety tips, and at least one on each floor of your home .

Power Outage:

1. Beware of the dangers of carbon monoxide ( CO ) . This deadly gas is a byproduct of incomplete combustion and is produced by common household appliances , such as gas grill and an electric generator powered . Do not bring these items to produce CO in your home.

2. Install a carbon monoxide detector in your home for winter safety tips year .

3. Use candles sparingly. Never leave candles unattended . When you go out - blow.

4. Place candles in non - solid foundations failover and away from flammable materials . Keep pets and children away from burning candles .

Be prepared winter safety tips:

1. Be prepared to prepare for three days - three ways. Make a plan for your family in case of disaster ; building a kit provides the necessary elements for a minimum of three days to engage in the registration of the Community Emergency Response Team ( CERT ) winter safety tips.

2. Keep tire chains , apparel , food / water in their vehicles. Always fill the fuel tank when it comes to three-quarters of a tank.

3. Inspect your home and take care of trees , branches or other objects that could pose a danger to your home during a storm. After removing trees and branches professionals.

Remember, winter safety tips when you change your clock, November 3 and "fall back" one hour, change the batteries in smoke detectors and carbon monoxide as well. Firefighters also recommend replacing smoke detectors every 10 years.

Hard Hat Stickers - Safety Hard Hat Stickers

Hard Hat Stickers

So put Hard Hat Stickers or decals helmet in a helmet?

Well, the list is almost endless, but here are some of the many uses that can be used. Now, the list is not exhaustive, and I apologize if I've left any out . But feel free to use your imagination. That's it.

Hard Hat Stickers: identification

If you work on a large construction project , there may be hundreds of helmets in the locker room . But there you have adjusted to your exact size and sit comfortably and safely every day. Place your label on it and you will find your own Hard Hat Stickers every time.

As job titles -unfortunately that is when the last red neck tells the CEO what it really is? Should I go? A simple sticker on their helmets immediately identify that "attire " was the Big Cheese.

Hard Hat Stickers: The staff does

You want to stand out from the crowd and let everyone know what you are doing . You're a Bulls fan or maybe Giants fan and a sticker helmet with the colors of your team will let everyone know where you are. Stars and Stripes , Skull and Crossbones , Daffy Duck , Road Runner, whatever floats your boat, they are there.

Hard Hat Stickers: Promotion and Branding

Get Hard Hat Stickers headset with the company logo and show that you are there. Make sure visitors wear hats with their label on what we must not forget that many sites you visit that day. You'd be surprised how many photos are taken once visitors equip PPE and its logo is in the center. This seems to happen especially when you get the " higher ups " to come to see how the project progresses. In fact, while you're at it , make your logos in high visibility jackets too. There is no such thing as bad publicity , they say.

Hard Hat Stickers: Site Security

One of the best ways to reinforce safety messages is important to have a label made and placed on each hull. Think about this for a second. While you will not see the message once or twice in his helmet , every time you see someone else Hard Hat Stickers, the safety message will be there before your eyes. Very simple , I know, but at the same time very effective.

Hard Hat Stickers: Safety and Supervision

Site security is paramount today. The Hard Hat Stickers are a way to identify who is in this area, and when . Can even be used to allow or deny access to some of the staff within the specified areas . But not until the own helmet Hard Hat Stickers. Other technology will be required to apply intelligence, such as CCTV , barcode readers or scanners , but you can see what is possible .

Pyramex Safety Glasses - Top Rated and Built To Last

Pyramex Safety Glasses

Pyramex safety glasses recently participated in an independent study of the performance during the months of January and February 2011 . The results are amazing . Different models of safety glasses and safety glasses Pyramex other two competitors were evaluated and compared . Scientific analysis was conducted in five different areas , including the lens color , comfort , versatility , taste and overall protection . Pyramex safety glasses highest rating of the three companies in relation to the five areas. 500 people were tested these glasses than 5,000 times . Notes of this comparison are significantly higher than the other two competitors were also tested.

Ratings confirmed Pyramex safety glasses is rated with respect to their competitors. Pyramex safety glasses has the highest quality standards for the construction and the highest standards of safety goggles manufacturers . With more than the other two companies in the five quality characteristics that were tested , were also awarded the four styles of safety glasses among the many that have been tested . These well-built safety glasses are designed to withstand the harshest conditions in eye protection without sacrificing comfort or quality. Independent testing has confirmed that this is the best overall provider as indicated by the testers conducting independent study .

The standards of comfort, style , protection and high Pyramex safety glasses a leader in the category of safety glasses. This time , you have to trust your instincts only. Go with the results and see for yourself the high quality sort Pyramex safety glasses to WorkingPerson.com today!

Workplace Safety Quiz - Workplace Safety Quiz With Answers

workplace safety quiz

A fun way to test your knowledge of employees is having a contest on work Workplace Safety Quiz . In addition to meetings of security awareness , checklists security contributions , daily security and safety posters , you can really maximize their attention to Workplace Safety Quiz and test your employees to see if your overall training is paying off.

There are two types of questionnaires , Workplace Safety Quiz in the Workplace Safety Quiz-specific and generic test their field contests. If given a questionnaire that includes both generic and specific aspects of security , or an exam question is a generic one that is specific ? On one hand, a comprehensive questionnaire appears more effective use of time. On the other hand , breaking the test questions up into two separate questionnaire could help focus more employees and make them think more about Workplace Safety Quiz.

It is recommended that if you are an employer , you must issue two separate questionnaires security , one generic questions , and the other with specific issues in the field. Having two separate questionnaire can be performed on different days and the employees can focus on each questionnaire separately , so it does not even look like an inefficient use of time . It also lets you quickly evaluate a template of knowledge about the overall safety and knowledge of specific security on the ground.

When is the right time to deliver the questionnaires ? Well, it must be correlated with the recent Workplace Safety Quiz training . Quotes , posters, and occur daily tips , so that should not be based off of that. Instead, every time there is an instruction to study the Workplace Safety Quiz, or when there is a security meeting shortly after these events , when it is expected to take place questionnaire. Obviously , the test should be in direct reference to the material covered during these events. It is recommended to test immediately after formal Workplace Safety Quiz training . Instead , wait a few days to spend .

A decent rule of thumb is that the questionnaire on job security right job many days after the equipment is equal to the number of hours devoted to the subject. So if you have a 7:00 meeting , wait a week before the issue of the contest. This way you can see if you are covered the material was internalized by employees.

21 Qualities of an Effective Safety Leader

All great safety programs are headed by great leaders. Mastering leadership skills is equally as important as mastering safety skills. They must work hand and glove for you to develop an outstanding safety initiative within your organization. Look through these twenty-one ideas to see how many you are using. This is a good list to begin to examine your performance. Over time, continue to add to the list. It's a commitment with a huge benefit for you personally and for the overall safety of those under your responsibility.

(1) Be a more visible leader of safety initiatives. It's important that employees see you as the "action" person who does not let safety issues go unanswered. Your response to issues helps build trust in the process and the overall efforts put forth by the safety department.

(2) React quickly to safety issues / concerns that are raised. You don't want to be considered a "black hole" when it comes to safety. Employees that raise concerns want answers. Even if nothing can be done, it is critically important that you respond in a timely manner. Set deadlines for yourself to get back to individuals who provide you with a request for help.

(3) Become a "take charge" leader. Don't wait around for others to do what you should be doing. Be aggressive in addressing issues. Be on the forefront of issues. Let people view you as someone who can lead and does lead.

(4) Complete assignments in a timely fashion. Leave no open-ended issues. Incomplete assignments is an unacceptable behavior for leaders. They finish what they start and they do things in as efficient and effective a manner that they can. Set deadlines for yourself and stay on track. If you need help, seek it. Just don't let things fall by the wayside. That does not endear you to your management, your peers or your employees.

(5) Anticipate issues. Be proactive. Always look for a better way. Keep your eyes on the big picture. When you view safety initiatives, always look for ways to improve the process. Again, be aggressive in anticipating events before they surface. Keeping this prospective will minimize that likelihood of a catastrophic event occurring without warning.

(6) Don't fall behind. Stay on task. Offer no excuses. Get things done quickly and right. Purchase some type of time management system such as the Franklin-Covy or Daytimer systems. If you prefer using a computer or hand-held device, set up your schedule on them. The bottom line is that you need one calendar--one schedule of events. Each day, prioritize items and get started. By making a list from which to work, you always know the tasks that lie ahead. This allows better scheduling and proficiency.

(7) Hold everyone accountable to do their share of the safety process. A true leader does their tasks but also requires those who undertake assignments for them to also complete their work. Accountability is a key characteristic all great leaders practice and expect from those they lead. You cannot do everything yourself. Raise your expectations and people will respond accordingly.

(8) Be a team player. Work well with everyone regardless of how you feel personally about them. You are a professional. You must work with everyone within the employment of your company. Build the reputation of being a cooperative and cordial player. You don't have to like someone but you have a professional obligation to work well with them. If you cannot do this, you don't deserve to lead.....period!

(9) Keep everyone informed of your activities. As you work through projects, keep your management team informed regarding progress. This is not as critical for short-term projects but it is important for projects that extend over several weeks. Short emails, memos, phone calls...use the best communication media for the situation. Document those contact periods and methods on your daily calendar so you can chronicle your activities should anyone question your efforts or communications. Never forget the person with the best notes will generally win the disagreement.

(10) If given an assignment, do it. Don't be told twice. When discussing an assignment from your manager, don't leave until you are very clear on the outcome desired. But, when the discussion is done and you are clear regarding your tasks, do them. Confidence and trust in your leadership abilities diminishes greatly if you have to be repeatedly told to start a task. An agile mindset works well. Carrying out your projects after the initial discussion increases your credibility and greatly enhances the trust level your management team will have in you.

(11) Raise your enthusiasm for all you do. Enthusiasm can be initiated for anything. When you train, do so with enthusiasm. Thinking you don't like to do a task, will make the task a drudgery. Being enthusiastic about undertaking a task will make the activity a pleasure to perform. It's all in the mind. To be perceived as enthusiastic, you must be enthusiastic. Behaving this way makes you a more pleasant person to be around and will also build your credibility.

(12) Stay busy. Minimize socialization. When you come to work, be prepared to work. Earn your pay by your productivity. Yes, it's important to take an occasional break. But, you are not paid to socialize. You are paid to produce. Visit but be constantly aware when visiting becomes a time wasting activity. Busy people get more done. And, people who get more done gain a higher level of respect in an organization. People with a higher level of respect usually have a greater opportunity to rise on the ladder of responsibility.

(13) Keep current on safety regulations. As a professional, you must continually build your learning curve. Network with fellow professionals, read magazines and books on safety and/or attend safety conferences. Use the internet to research a topic or issue. Keep learning and you will grow. If you are not learning, you are regressing because there is always something new on the horizon.

(14) Be punctual. If you schedule a meeting or are requested to participate in a meeting, be there on time. This simply comes down to being respectful to others.

(15) Act like you want the job. To be considered for a leadership position, you must display an ability to do the job. Acting indifferent or in an inefficient manner does not endear one to becoming a leaders. If you want to be the safety leader, let people know by your actions that you can handle the job.

(16) Manage by walking around. Be visible in the field. Schedule regular tours. Talk to people about safe behavior. Correct any unsafe activities or conditions you observe. Being visible ties the job to you. You cannot manage safety from your office.

(17) You are always on display. Never forget that everyone is looking up to you for leadership of the safety initiatives. Your behavior, demeanor, and attitude are in a constant evaluation mode. Let everyone see what they need to see in order to build confidence in your leadership ability and in the overall safety initiative undertaken by your department.

(18) Provide solutions, not problems: Great leaders do not give their management problems to solve. They take the initiative and provide solutions. This is a proactive position. Your job is not to unload "monkeys" on the back of those who manage your job activities. Take on problems and create workable solutions if you want to truly make an impression on those who are watching your performance.

(19) Be easy to work with: Become a "servant leader." Those leaders who strive to provide top quality service to those they lead and to those they work under will separate themselves from the average crowd. Don't make life difficult for those who need to work with you in any capacity. Be cordial, polite, and generous with your knowledge. Share what you know and become helpful as best you can. Helping others with a service mentality, in the long run, will result in greater rewards for you and recognition of your leadership abilities.
(20) Leadership references: Continue to grow your knowledge of safety leadership. Find good books that speak to leadership issues. Two of my favorite authors on leadership are John Maxwell and John Wooden. Both offer practical leadership ideas that are applicable in virtually every leadership endeavor one might undertake. Read the books with a highlighter and pen. When you read a passage that you find significant, highlight it. Write notes on pages where personal thoughts or ideas are generated as you read. Then the book becomes a living document to which you can refer over and over again. Build a library of references. Serious students of leadership and management never stop looking for the next great idea that might help build their career or add to their success components.

(21) View your work as a career building opportunity, not a job. Too many people only want to collect a good paycheck without providing the necessary effort to earn that pay. Viewing your work as a career and not a job gives one an entirely different prospective. Careers offer a future and greater security than a job. A career mentality enables you to see the bigger picture and ultimately make more significant contributions. People with jobs think about the weekend, not their future.

Make it a habit to periodically review these leadership qualities with the intent of continuously improving your performance. That's what true leaders do. Are you ready to join this elite group?

Professional speaker, consultant and author Billy Arcement, MEd-The Leadership Strategist, shares his messages on leadership and personal development with business, government, and education leaders. He authored Searching For Success, now internationally published. His new book, Journeying on Holy Ground, is an insightful "Life Manual" for guidance to establish priorities on life's journey. His website, http://www.SearchingForSuccess.com provides information about his services. Copyright 2010.

Article Source: http://EzineArticles.com/4921241

Crib Bumper Safety - Best Baby Products

Crib Bumper Safety

With over 60 nurseries and the room designs of Children We believe our credit is sure sober What our protectors of cradle ask it a lot. For some parents, the crib bumper safety is an absolute necessity . For other resounding are a no-no. And for many, are a hazy gray area uncertainty. Today , we want to share our thoughts , and most Important get yours . Please let us know about your position protectors of cradle , in commenting on this blog.

As a mother of two children, I admit I used Quebec protectors of cradle . The Charm of a beautiful attractive crib bumper safety that great sense of style me and my desire of keeping cozy put children. From the first time put me that my little boy in his crib bumper safety was great big Happy opted for a crib bumper safety years . Still ...

On the other hand , last fall our with sat Kimberlee - BooBoo Busters owner (a professional service Baby correction ) to get your take security in the crib bumper safety. His statement " bounce the crib bumper safety . " Furthermore we on a recent conversation with a magazine Prominent parents, our learned Quebec no longer print the pictures of the crib bumper safety without a security warning . With a slightly different function and form , alternative styles are AVAILABLE Fighting for crib bumper safety problems standard bumpers - as the breathable bumpers What shows here .

Although put kids are old enough as to be safe ( big sigh of relief!) The controversy bothers What many families are expecting or have children at home. Thus, we come to one our fabless Crib bumper safety Bedding Favorites - Katy Mimari Caden Lane - thoughts for Addition Maker As much as Mom and lovely bedding or cradle . According to Katy, "

As any parent hoping to find , it seems What are pros and cons to everything related to your child ... to give the breast to bottle wrap or ... or not .... pacifier or thumb discussions .... are endless! and at the end of the day , each parent decides what is best for them and their children . Doubt that no end crib bumper safety help the non manger , it's like having not there duvet covers in the master bedroom.

Aspect the design is there. But there are also non Practicality , they protect little arms are so tired Tablets feet slip Between the cradle , keep and eye worm sneak peek Quebec has the bedroom to make Quebec 're asleep . But remember, you can remove the first year , and put them back after of ESO . use in all Oh no! true Quebec 's choice. "

Do you think really that this solution may resolve your problem?

Children's Basic Guide to Bicycle Safety

Do You Have a CCNSG Safety Passport?

Crib Bumper Safety